Performance Highlight:

Perimeter Guarding & Fencing

NPSG has been tested at the highest standards in the e-fulfillment industry installing approximately 90% of the perimeter guarding and fencing for a Major e-Retail Fulfillment Corporation since 2015.

In late 2017, based on ISO 13857, a Major e-Retail Fulfillment Corporation decided that it needed to change the specifications for its perimeter guarding (fencing) which segregates and protects employees from the robotic inventory systems. The Major e-Retail Fulfillment Corporation required that any vendor that wished to supply perimeter guarding going forward create a design that was fully compliant with a Major e-Retail Fulfillment Corporation requirements and ISO

NPSG staffed a team to undertake this project and create a design spec that would satisfy Key components of the project included:

Working with Macgregor Architects in designing the fence layout in a CAD system.
Impact testing – the fence had to be thoroughly impact tested at any point where a robot might breach the perimeter guarding. NPSG set up testing areas in its Kennesaw and Reno warehouses.
Portions of the guarding and guarding components were tested to verify the guarding was within tolerances. Impact testing needed to be digitally captured to prove test compliance.
REACH compliance – another requirement was that any of the materials to be utilized in any fencing installation were REACH compliant. REACH is a European chemical regulation which e-Retail Fulfillment Corporation was adopting worldwide. NPSG sent samples of all of the different parts from its fencing system to an approved test site to ensure compliance with the REACH code.

NPSG’s design was ultimately chosen as the standard for all North American fence e-Retail Fulfillment Corporation Robotics projects in North America must now use NPSG’s perimeter guarding, whether NPSG is the 3rd party installation partner or not.